![background image](http://html1.mh-extra.com/html/darwin-fitness/darwin-rm40/darwin-rm40_assembly-and-operating-instructions-manual_510606030.webp)
30
RB40
5.3
Error Codes and Troubleshooting
The electronics of the equipment continuously carries out tests. In case of deviations, an error code
appears on the display and normal operation is stopped for your safety.
+
E-2: Check the cable connections and whether the cables are damaged.
Please contact Sport-Tiedje for technical support.
5.4
Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specified intervals:
Part
Weekly
Monthly
Quarterly
Half-yearly
Display console
C
I
Lubrication of slide rail and moving parts
I
Plastic covers
C
I
Screws and cable connections
I
Legend: C = clean; I = inspect
6
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an electricals recycling centre. Further information can be obtained
from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.
Summary of Contents for DARWIN RM40
