User Manual
Page 1: ...User Manual ...
Page 2: ...ccess the controls Blend Mixes the clean input signal with the overdriven signal The clean signal is fixed at unity gain while the volume of the overdriven signal is set by the Level knob allowing for fine control of the blend ratio Turn clockwise to blend in the clean signal Tone Controls the high frequency content of the sound A variable low pass filter from 3 kHz to 8 kHz Turn CCW for a brighte...
Page 3: ...Voltage 9V DC Center Negative Dimensions Width 50 mm 2 in Height 100 mm 4 in Depth 45 mm 1 75 in Weight 205 g 0 45 lb Warning The Microtubes B1K has a current draw of 30 mA Only use a regulated 9V DC adapter with a center negative plug Due to ecological reasons it does not accept batteries Unregulated power supplies and or higher voltages may result in suboptimal noise performance and even damage ...
Page 4: ... can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications There is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is enco...
