DMP0145, SMALL AIR ROUTER KIT
USER MANUAL
© Dark Matter Composites Ltd
Page 21 of 23
t/f
+44 (0)1582 79100
www
.darkmattercomposites.com
Unit 8 Redbourn Industrial Estate, High Street, Redbourn, Hertfordshire, AL3 7LG, UK
Registered in England & Wales No: 5395870
6. Cleaning & Maintenance
The diamond routing bits remove composite material in dust form. When used with a suitable
portable/mobile dust extraction unit for use with ‘on-tool’ dust extraction, dust generation outside
the shroud assembly is negligible when used correctly. However, components within the
shroud assembly become dust contaminated during each use.
In addition to the Dynabrade Maintenance Instructions included in this manual, the following
cleaning and maintenance activities should be followed.
Routing Bits
Remove and clean the routing bits as detailed in section 1.
Router Assembly
The following parts of the router assembly become contaminated with dust during each use.
To clean the collet assembly and air motor:
Disassemble these parts as stated in the Dynabrade Maintenance Instructions.
Mineral spirits are recommended for cleaning these parts.
Where required use a soft brush to loosen dust from the parts.
Dry with lint free tissue.
Reassemble as stated in the Dynabrade Maintenance Instructions.
Do NOT clean with any solvents or oils containing acids, esters, ketones, chlorinated
hydrocarbons or nitro carbons.
Do NOT clean with chemicals that have a low flash point (for example: acetone, WD40).
Lock Nut
Vacuum
Base
Assembly
Routing
Bit
Collar adaptor
Vacuum
swivel
assembly
Collet
assembly
