I N S T A L L A T I O N M A N U A L
B 0 9 U L F L I T H I U M B A T T E R Y
R e v . 1
© 2 0 1 9 D a r f o n E l e c t r o n i c s C o r p .
P a g e 1 2 o f 2 8
5.3
System installation
5.3.1
Installation clearance
The battery system cabinet can be installed on the floor and wall mount. The system adopts the natural heat dissipation method.
The recommended installation height of the wall mount mode is about 1-1.2 meters. The bottom of the fixed installation bracket
is used as the standard. The left and right sides of the cabinet should be left and installed. 300mm cooling space
5.3.2
Installation steps
Move the battery cabinet to the installation site to ensure that the floor and wall can withstand the total weight of the battery
system. After the preparation is completed, follow the steps below to install it.
Step 1 - Remove the side door: Use a screwdriver to
unscrew the 6 screws that secure the side door and remove
the side door panel.
Step 2 - Remove the mounting bracket: Use a screwdriver to
remove the 4 fixing screws on both sides of the mounting
bracket and take off the bracket.
