S9
S14
S8
E6
J2
4. Front cable routing assembly
Thread the brake hoses to the foam into the down tube of the frame to avoid the clacking noisy
sounds during riding.
For Di2 system, use F type of RS-910, which has its mount cap be able to fit on the downtube.
Also, install battery in with a J2 battery mount cover on it.
Foam Tube
*Picture example: DI2 system
2.5mm
2Nm
2.5mm
2Nm
Put the down bearing (E6) first and thread the front brake cable through the inside fork to the
steerer tube. And then install the fork to the frame.
Be aware that the fork might be hit by the
headtube and scratched because of
over-rotating.
EW-RS910-F
!