Page 6 of 27
2.1 Pre-Installation Responsibilities and component packing list
This document is a guide to the steps that need to be performed to correctly install
the X240 Examination light. However, the work required to be performed is the
responsibility of the owner or designated contractor/s.
All fixings between DARAY lights and the building super-structure must be approved
by either the chief project engineer or an appropriate and competent structural
assessor.
The components supplied by DARAY for fitting / installation should be the following
items in the specified quantities.
X240LD/FDM/S
Qty.
X240LW
Qty.
Plug top transformer
1
Plug top transformer
1
Desk Clamp/Fixed Desk Mount/Desk
Stand
1
Wall b fixings
1
Light head and flexible arm
1
Thumb Screw for Wall Mount
Microfibre cloth
1
Light head and flexible arm
1
User Manual
1
Microfibre cloth
1
User Manual
1
X240LR
Qty.
X240LM
Qty.
Plug top transformer
1
Plug top transformer
1
Rail Clamp
1
Extension cable (3m)
Thumb Screw for Rail Clamp
1
Mobile base (3 pieces)
1
Light head and flexible arm
1
Light head and flexible arm
1
Microfibre cloth
1
Microfibre cloth
1
User Manual
1
User Manual
1
X240LE1
Qty.
X240LE2
Transformer
1
Transformer
BESA Wall Bracket (W3)
1
Spreader Plate Wall Bracket (W4)
Light head and spring balanced rigid
arm
1
Light head and spring balanced rigid
arm
Microfibre cloth
1
Microfibre cloth
User Manual
1
User Manual