Page
6
of
14
3. Installation
3.1 Considerations
Live Electric
Circuitry
All personnel working around live circuitry should be qualified
and following proper procedures
Existing
Environmental
Factors
When fitting, considerations have to be taken for existing
services such as; doors, shelves, cupboards, desk space and
obstructions on the desk; such as computer monitors along with
any possible surrounding hazards.
Environmental
Responsibility
Once our products are installed all packaging should be disposed
of appropriately and recycled in accordance with local governing
regulations at an authorised recycling facility.
Work to be
undertaken
For correct installation it will be necessary to decide the
location of where you want the head to situate. This will be
dependent on the specific requirements of your work /
examinations.
Locations of
nearest power
Our base unit design uses a standard moulded plug connection.
Only the supplied certified connection should be used with the
light.
The length of this cable is approximately 1.6m so the light should
be within 1.3m of a mains power point (5m cable for mobile
versions).
Daray’s standard mounting option for the MAG700 series is a Desk G clamp mount, we
also offer additional or bespoke mounting options. Ultimately the mounting method
used is the responsibility of the project engineer or fitter. This includes deciding on
the suitability of the surface to be fixed to.