DARAY MAG700 Range, Installation Manual, Page: 8 / 24

Page 7 of 19
2.2 Pre-Start Checks
Please check that the power cable is without visible damage, harsh folds, knots or
cuts in the rubberised coating.
When applicable, please check that the cable is fully inserted into the power socket,
before switching the power on.
Please check that the head and all parts of the base are without visible damage.
2.2 Adjusting the Lighthead
The MAG700 head is secured using a large thumb screw.
This also controls the forward and backward motion of the head itself.
Loosening this thumb screw will allow you to position the lighthead
up or down.
Keep hold of the lighthead when loosening the screw to prevent
sudden drops, care should also be taken not to over tighten
the screw as this could cause stiffness in the joint.
Thumb Screw
Power switch
Dust Cover