DARAY MAG700 Range, Installation Manual, Page: 16 / 24

Page 15 of 19
4.4 Adjustments
4.4.1 Rigid Arm Adjustments
The MAG700 lights are all mounted on spring tensioned rigid arms which are balanced
specifically to be able to be moved using a single finger touch.
Warning! These arms are under spring tension, as such do not try and
adjust the internal mechanics of the arms.
These arms shouldn’t need adjustment in their life cycle however if they start to
droop or require any other work, we recommend that you contact Daray customer
services to discuss this.
4.4.2 Detaching Parts
De-construction of the lights should be done following a reverse order of the
instructions in section 4.
The MAG700 is a completely enclosed light and arm it should not be
opened and is not serviceable outside of a DARAY Authorised service
centre.
For any issues requiring service work on the MAG700 please contact DARAY, as
unauthorised work will invalidate the warranty.
4.5 Fuses and their replacement
The MAG700 series is a mains powered device which has a fuse located in the plug for
the wall socket. There are no other user changeable parts in this light. For any
advice on internal circuit burn-outs and other replacements; please contact Daray.
The fuse supplied in the plug is 3 amps. To replace the fuse you will need a thin flat
bladed screwdriver. Insert the screwdriver into one of the slots in the side of the
fuse housing and wedge the fuse and its housing out of the plug. Replace and
reinsert.
Power on the light and check that it is fully functional. If fuse blows again then it
may need investigating further by an engineer.