DARAY MAG700 Range, Installation Manual, Page: 14 / 24

Page 13 of 19
4. Maintenance
The proposed maintenance is only a suggestion. Depending on the use of the product
and the operating environment, this may need to be revised more often.
DO NOT ATTEMPT ANY FIXES BEFORE CONSULTING DARAY.
If you cannot resolve a problem then please contact our helpline on 0800 878 9864
or email support@daray.co.uk
4.1 Maintenance schedule
Weekly checks
should include:-
Range of movement testing, it should be light and easy to move
throughout the range
No visible signs of excessive wear.
Monthly checks
to include:-
Check the joints and thumb screws for wear and report as
necessary
Six monthly
checks to
include:-
Remove arm, clean spigot and re-grease as necessary.
Check all electrical connections are sound and that there is no
visible cable wear.
All fixings to be checked and be of sound construction.
4.2 Safety Precautions

For all cleaning work, power off the equipment and where possible unplug
the mains socket, only minimal cleaning fluids should be used.

Please do not look directly into the light source when illuminated.

If the equipment is dented or scratched this should not impact the usability
of our lights however we advise that if the BioProtect® coating is damaged
and the metal casing underneath is visible, please do not attempt to ‘paint’
over it as this will impact upon the effectiveness of the coating, simply use
an alcohol based cleaning spray when cleaning and pay special attention to
the cut.
If there is damage to the power cable or if exposed wire is visible
DO NOT USE