DAPAudio NRG-8 User Manual Download Page 6

 

 

 

5 

 

  

 

 

NRG-8 

Product code: D3623 

2.

 

Safety 

 

Important 
Read and follow the instructions in this user manual before installing, operating or 
servicing this product. 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual. 

 

Warnings and Safety Instructions 

 

DANGER 
Danger for children
 

For adult use only. The device must be installed beyond the reach of children. 

 

Do not leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within 
children’s reach. Packaging material is a potential source of danger for children. 

 

WARNING 
Stability hazard 

The device may fall if it is mounted on a distance pole, causing personal injury or death. The device is for 
use only with the stands that are recommended in this user manual. 

 

Make sure that the device is safely mounted on a distance pole. 

 

Do not place objects on the top of the device when it is mounted on a distance pole. These objects 
may fall and cause injury. 

 

Attention 
Speaker load 

 

Make sure that the total wattage of all connected speakers does not exceed the rated wattage of 
the amplifier. 

 

Make sure that the speaker cable run is appropriate for the total speaker load. 

 

Attention 
General safety
 

 

Do not shake the device. Avoid brute force when installing or operating the device. 

 

If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it 
on immediately. Let the device reach room temperature before switching it on, otherwise it may be 
damaged by the formed condensation. 

 

If the device fails to work properly, discontinue the use immediately. 

 

 

Summary of Contents for NRG-8

























Reviews: