DAPAudio NRG-8, User Manual, Page: 16 / 24

15
NRG-8
Product code: D3623
Overhead Mounting with a Clamp
CAUTION
Restrict the access under the work area during installation and/or deinstallation.
You can mount the device with a clamp to a truss. See 3.5. Optional Accessories on page 10.
To mount the device, follow the steps below:
Use a hex key to remove the hex screw from
the mounting opening (01) at the back end of
the device.
Fig. 11
Insert the spigot in the mounting opening (01).
Turn the spigot clockwise to tighten it.
Fig. 12
Attach the clamp to the overhead structure.
Lift the device under the clamp and insert the
spigot into the socket on the base of the
clamp.
Note:
If the spigot is removed, reinstall the hex screw in
the mounting opening (01). If the screw is not
installed in the mounting opening (01), air leaks
occur in the enclosure. This results in undesirable
performance of the device.
Fig. 13