DAPAudio NRG-15 User Manual Download Page 20 | Manualshive

Page: 20 / 28

DAPAudio NRG-15 User Manual Download Page 20

19

NRG-15

Product code: D3626

Setup with Multiple Passive Full-Range Speakers

You can use multiple full-range passive speakers NRG-15 as stage monitors and connect them to an
amplifier and an audio mixer.

To complete this setup:

Connect the speaker connector IN (04) of the 1

st

full-range passive speaker to the output A of the

amplifier.

Connect the speaker connector THRU (05) of the 1

st

full-range passive speaker to the speaker

connector IN (04) of the 2

nd

full-range passive speaker. You can connect more full-range passive

speakers on line A, as necessary.

Connect the speaker connector IN (04) of the 3

rd

full-range passive speaker to the output B of the

amplifier.

Connect the speaker connector THRU (05) of the 3

rd

full-range passive speaker to the speaker

connector IN (04) of the 4

th

full-range passive speaker. You can connect more full-range passive

speakers on line B, as necessary.

Note:

As an alternative you can use the 4-pin terminal connector (06) to connect the device to other devices.
See 5.2. Connection Types on page 17.

Fig. 15

«
...
18
19
20
21
22
...
»

Summary of Contents for NRG-15





























Reviews:

No comments