DAPAudio NRG-15, User Manual, Page: 17 / 28

16
NRG-15
Product code: D3626
Overhead Mounting with a Clamp
CAUTION
Restrict the access under the work area during installation and/or deinstallation.
You can mount the device with a clamp to a truss. See 3.5. Optional Accessories on page 10.
To mount the device, follow the steps below:
Use a hex key to remove the hex screw from
the 2 mounting openings (01).
Fig. 11
Insert 2 spigots in the 2 mounting openings
(01).
Turn the spigots clockwise to tighten them.
Fig. 12
Attach 2 clamps to the overhead structure.
Lift the device under the clamps and insert the
spigots into the sockets on the base of the
clamps.
Note:
If the spigot is removed, reinstall the hex screws in
the mounting openings (01). If the screws are not
installed in the mounting openings (01), air leaks
occur in the enclosure. This results in undesirable
performance of the device.
Fig. 13