22
Order code: D1476B
EDGE EBS-1
14. Ant Dc
In this menu you can set the antenna input/output power supply.
01)
Turn the control (13) until the display shows:
02)
Press the control (13) to edit.
03)
Turn the control (13) to select ON or OFF.
04)
Press the control (13) to confirm.
●
If the input power comes from the power adapter: the “ANT DC: On” will power the active antenna
via the BNC antenna connectors (20/25).
●
If the input power comes from the antenna distributor: the “ANT DC: On” will power the receiver.
Note: When using the antenna distributor together with the power adapter, ANT DC must be set to “Off”
