20
Order code: D1476B
EDGE EBS-1
9. Low Cut
In this menu you can set the high-pass filter. The high-pass filter removes low frequency signals picked up
by the transmitter.
01)
Turn the control (13) until the display shows:
02)
Press the control (13) to edit.
03)
Turn the control (13) to select ON or OFF.
04)
Press the control (13) to confirm.
10. Squelch
In this menu you can set the squelch threshold. It eliminates the noise resulting from momentary spikes in
the output when turning the transmitter off. When too high in poor reception areas, it may compromise
the reception range. When too low, the noise may damage your hearing and/or the speakers.
01)
Turn the control (13) until the display shows:
02)
Press the control (13) to edit.
03)
Turn the control (13) to set the value. The adjustment range is 1–10.
04)
Press the control (13) to save changes.
11. Tone Key
In this menu you can set the tone key, by means of which the receiver can identify the presence of the
transmitter. The tone key also provides the battery status indication on the receiver.
01)
Turn the control (13) until the display shows:
02)
Press the control (13) to edit.
03)
Turn the control (13) to select ON or OFF.
04)
Press the control (13) to confirm.
