6
Controlpanel
Fig. 2
1)
Signal LED
Indicates the presence of an audio signal.
2)
Power LED
Indicates that AC power is connected and the RX-10A is switched in.
3) Protect
Indicates an electrical or thermal fault condition in the power amp.
4) Limit LED
Indicates that the analog soft clipping circuit is active. A soft clipping circuit clips short signal peaks in
a way that is not sounding unpleasant to your ears. Although a soft clipping circuit limits your
dynamic range, it allows you to operate on a higher average volume level.
If the limit led lights up continuously, we strongly suggest lowering the input level using the
master
volume (10)
control.
5) Speaker out
Speakon fullrange speaker output for connecting a second RX-10A. Make sure the impedance of the
external speaker is minimal 8 Ω.
6) Bass control
Controls the level of the low frequencies.
7) Treble control
Controls the level of the high frequencies.
8) Mic gain
Controls the level of the
mic in (13)
input.
9) Line gain
Controls the level of the
line in (14)
input.
10)
Master volume
Controls the volume of the RX-10A and the level of the
mix out (11)
output.
11)
Mix out output
Line level electronically balanced Male XLR socket. The mix out signal level depends on the settings
of the
master volume (10)
control.
Summary of Contents for D3315
Page 13: ...2011 Dap Audio...
