Ordercode: D1464
COM-42
Microphone
Fig. 03
Grille
LED status indicator
The LED indicator will light up green in normal operation mode.
The LED indicator will light up red in mute mode.
The LED indicator will flash red when the battery is low.
Power/mute switch
Press and hold down the button to switch the microphone ON or OFF. Press once to mute or unmute
the microphone.
IR lens
The lens captures IR signal from the COM-42 in order to channelize the microphone. The battery
cover needs to be open and the IR lens should be facing the COM-42 to load the selected channel.
Plastic screwdriver
The screwdriver can be used for adjusting input gain value, by turning the control (20).
Battery housing cover
Unscrew the cover to reveal the controls.
Input gain control
Turn the control with the included screwdriver (18). Set the input gain to the desired level. The RF
level bar on the display of the COM-42 will increase or decrease.
Battery holder
7
Summary of Contents for COM-42
Page 15: ...Ordercode D1464 COM 42 14...
Page 16: ...2015 DAP Audio...
