14
COM-42 2Ch Handheld set
Product code: D1464
Pairing
The receiver can be paired with two transmitters: one transmitter on channel A (CH A) and the other
transmitter on channel B (CH B). The receiver and the transmitters must be set to the same channel.
Otherwise the wireless system will not work correctly. For more information about the frequencies per
channel, see 5.6. Channels Overview on page 18.
To pair the transmitter to the receiver:
01)
Switch on the receiver. See 5.1. Receiver Switching ON/OFF on page 16.
02)
Switch on the transmitter. See 5.2. Transmitter Switching ON/OFF on page 16.
03)
Remove the microphone housing (23) from the microphone body (24).
04)
Position the transmitter at a distance of about 15–30 cm from the receiver. Make sure that the IR
sensor (21) on the transmitter is facing the IR sensor (09) on the receiver.
05)
Select an available channel with the UP buttons (02)/(06) and the DOWN/PAIR buttons (03)/(05). The
selection range is 00–99.
Notes:
●
Press and hold down the UP button (02)/(06) to fast forward to the next available channel.
●
Press and hold down the DOWN/PAIR button (03)/(05) to fast backward to the previous available
channel.
06)
Press and hold the UP and the DOWN/PAIR buttons for the respective channel A or B for 2 seconds to
send the channel information to the transmitter. The transmitter and the receiver are paired. The RF
indicator bar for the respective channel on the LCD display (04) lights up. The selected channel and
the channel frequency show on the LCD display (04). See 5.5. Receiver Display Indications on
page 17 and 5.6. Channels Overview on page 18 for more information.
07)
Place the microphone housing (23) on the microphone body (24) and turn it clockwise to tighten it.