13
COM-42 2Ch Handheld set
Product code: D1464
Transmitter Setup
Installation of the Batteries
The microphone is delivered without batteries. It accepts 2 LR6 (alkaline) AA batteries.
To install the batteries:
01)
Turn the microphone housing (23) counterclockwise and remove it from the microphone body (24).
See Fig. 08.
02)
Press the battery compartment lock (25) with one hand and the same time pull the battery
compartment cover (27) with the other hand to open the battery compartment cover (27). See
Fig. 09.
Fig. 08
Fig. 09
Insert the batteries into the battery compartment (26). The transmitter operates with 2 LR6 (alkaline)
AA batteries. The batteries are not delivered with the product.
Note:
Make sure that you install the batteries with correct polarity orientation.
Close the battery compartment cover (27).
Place the microphone housing (23) on the microphone body (24) and turn it clockwise to tighten it.
Note:
The mute LED indicator (18) starts blinking in red when the battery capacity is low. Change the batteries
to continue operation.