manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 334

Custom Protocols

334

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Mark unhandled packets
For information about this checkbox, please see Protocol Settings.

Protocol-specific information
Enable analysis
Check this box to enable the analysis of this custom-made protocol. All protocol tabs in this dialog have
such a checkbox, which can be useful if a recording contains data from several protocols, and you are not
interested in some of these.

Units
In the Units table, one or more custom-made protocol Units can be specified. The information in this table
normally can be found in the Configuration ROM of the node of which Unit is part of. It consists of: 

Unit
Using the checkbox before each Unit in the table you can enable or disable each Unit individually for
analysis. If the box is not checked, the custom-made protocol related transactions for this Unit will be
skipped. 

Node Spec.
A Unit is part of a node. As explained before, nodes are specified using Node Specifications. The number
in this column corresponds to the Node-Specification numbers of the table in the upper part of the dialog.

19.3.6. SBP-2 Example

For the custom protocol SBP-2 example it’s prerequisite to add directory ‘example’ to 2 tab-pages of the
settings dialog. These are tab-pages ‘Protocols’ and ‘Directories’. For a detail description of these
tab-pages, see sections Protocol Settings and Directory Settings.

The directory addition to tab-page ‘Protocols’ will include directory ‘examples’ to the custom protocols
search paths. The custom protocol SBP-2 is defined in file ‘sbp2.pfs’. 

The directory addition to tab-page ‘Directories’ will include directory ‘examples’ to the custom formats
search paths. The custom format of the custom protocol SBP-2 is defined in file ‘ROMConfig.dff’.  

The custom protocol SBP-2 is recognized by the Protocol View of the Recorder after restart of the
Analyzer application.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands