manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 265

Mil1394 Protocol support

265

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

channel number (plus a default 'case'). Below the 'Mil1394Format2' is shown in more detail.

The 'switch' item is selected and we can see in the properties for this switch that it tests the input
parameter 'channel'. If the channel number is 22, two (hexa)decimal fields are added. If the channel
number is 23, four floating point values are added to the message payload.

In the 'Result' pane we filled in a value 22 for the 'channel' input parameter. As a result we see the format
with two (hexa)decimal fields.

13.4.2. Set Options

To be able to use the format definitions in this format set for the Mil1394 Protocol you need to set the
correct 'Set options'. Below the 'Set options' of the example file are shown.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands