manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 236

Mil1394 Protocol support

236

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

These files could be created with the Control Panel of the Mil1394 Signal Monitor itself or with another
tool with Control Panel like the Scriptor.

·

Signal Definitions: Allows loading a set of signals from a .csv file, overwriting the current signal set. This
function was added to support loading signal definition files as used in previous versions of the
application.

Export

·

Signal log file: Allows writing the recorded signal values to a text file in almost the same format as was
used by older versions of the signal monitor. Due to changes in the way the STOF packet is monitored,
the file format no longer has a dedicated section for STOF packet contents. Instead, STOF packet
contents can be monitored in the same way as other values.

·

Control Panel: Allows exporting the current Control Panel to a text file. The text file can then be loaded
into any other tool that contains a Control Panel like the Scriptor.

Tools

Settings
This command will bring up the Settings Dialog.

Windows

Monitor
This command will bring up the Monitor window.

Recorder
This command will bring up the Recorder window.

Commander
This command will bring up the Commander window.

Generator
This command will bring up the Generator window.

Scriptor
This command will bringup the Scriptor window.

Main
This command will bring up the main window.

Help

Manual
This command will bring up the help dialog and navigates to the first page.

Mil1394 Signal Monitor
This command will bring up the help dialog and navigates to the first page of the Mil1394 Signal Monitor
section.

Analyzer Info
This command will bring up a dialog that shows information about the analyzer currently in use.

About
This command will bring up the About... dialog.

13.1.2.2. Toolbar

The Mil1394 Signal Monitor toolbar is shown below and contains respectively the following items:

Controls

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands