manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 204

Filter/Trigger

204

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

If you want to change the trigger settings, select the Trigger page (like above) or General Trigger page. To
change the Filter settings, select the Filter page. If you use one of the four basic packet sets and you want
to change one of them, select the corresponding SetA, SetB, SetC or SetD pages.

12.1.1. Trigger

The Trigger Sequencer is not available on

·

Stealth Series in Symbol Recorder mode

An example of the Trigger page is shown below.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands