3
4. Set the lavatory (
A
) into the proper position
on top of the Orrington™ bathroom vanity. Ad-
just the lavatory position to assure that there is
an even amount of wood showing around the
base of the lavatory (
A
).
5. Press down firmly on the lavatory rim to
distribute the adhesive.
6. Remove excess adhesive with a dry
cloth
.
7. Dampen a
cloth
with
rubbing alcohol
and
clean any unwanted
adhesive caulk
from the
lavatory surface as soon as lavatory (
A
) has been
placed.
8. Complete the faucet and drain connections
per the manufacturer’s recommendations.
For installation on other bathroom vanities
1. Use a
level
to assure that the slab or counter
top is perfectly flat in length and width.
InstallatIon InstructIons
For installation on the Orrington™ bathroom vanity
1. Install the Orrington™ bathroom vanity
according to the Installation Instructions
provided with the bathroom vanity.
2. Assemble faucet and drain (not included) in
lavatory (
A
) according to the manufacturer’s rec-
ommendations.
3. Apply a continuous bead of
adhesive caulk
(not included) in the groove on the top surface
of the Orrington™ bathroom vanity to assure a
water tight seal between the lavatory (
A
) and
vanity. Spread
adhesive caulk
slightly with a
put-
ty knife
or other flat tool.
Product dImensIons
4”
8”
3
1/4”
2
7/8”
8
1/8”
17
3/8”
16
3/4”
23
3/4”
7
1/8”
2
7/8”
7
1/8”
12
3/4”
8”
11
1/4”
3/8”
HOT
1
1/4”
WASTE
3/8”
COLD
FINISHED FLOOR
