5
0
6
7
3
3
3
•
V
e
rsi
o
n
1
.0
•
2
9
.0
6
.2
0
1
1
General information
Introduction
This section gives you the general information about this service manual and about the unit.
Manual, part no.
Part number of this service manual is 067333.
Target group
The target group for this service manual are the technicians who install and maintain
the HEX 70/90/120 unit as well as the users of the unit.
Copyright
Copying of this service manual, or part of it, is forbidden without prior written permission
from Dantherm Air Handling.
Reservations
Dantherm Air Handling reserves the right to make changes and improvements to the
product and the service manual at any time without prior notice or obligation.
EC-Declaration of
Conformity
Dantherm Air Handling A/S, Marienlystvej 65, DK-7800 Skive hereby declare that the
units mentioned below
with the corresponding part numbers
HEX 70/90/120: 352915/352916/352917
are in conformity with the following directives:
2006/42/EF
Directive on the safety of machines
2006/95EC
Low Voltage Directive
2004/108/EF
EMC Directive
- and are manufactured in conformity with the following standards:
EN 60 950-1:
2006
EN 60 950-1/A11: 2009
EN 61 000 6-2
Immunity : 2005
EN 61 000 6-3
Emission : 2007
Skive, 29.06.2011
Recycling
The unit is designed to last for many years. When the time comes for the unit to be re-
cycled, the unit should be recycled according to national rules and procedures to pro-
tect the environment.
