Dantherm HEX 70 Service Manual Download Page 20

 

20 

Service agreement 

 

 

Introduction 

The unit includes mechanical and electrical parts and the unit is often placed in a rough 
environment where the components are exposed to different climate conditions. There-
fore the unit needs preventative maintenance on a regular basis. 

 

Hotline 

Dantherm Air Handling A/S 

„s After Sales Support Department is ready to help you in 

case of a problem. 

To help you in the best way possible, please have the following information ready when 
contacting Dantherm Air Handling A/S: 

 

  Name 

  Company 

  Country 

  Phone no. 

  Email 

  Type (unit) 

  Site/location (unit) 

  Serial no/order no. 

  Description of the problem 

 

Contact Dantherm Air Handling A/S, ask for After Sales Support, and help will be pro-
vided as soon as possible: 

Phone:  +45 96 14 37 00 
Fax: 

+45 96 14 38 00 

Email:  [email protected] 

 

Preventive 
maintenance 

Dantherm Air Handling A/S offers to do the preventive maintenance on the units so that 
they at all times will operate according to factory standards. 

 

Corrective and 
emergency repair 

In case of malfunctions of the product Dantherm Air Handling A/S offers to do emer-
gency repair on the climate units. Agreements will be made with the customer on re-
sponse time and price. 

 

Setup 

Dantherm Air Handling A/S has established a network of service partners to do the pre-
ventative maintenance. The partner is trained and certified on the actual climate units. 
The partner will also carry an adequate number of spare parts 

– so that any repairs can 

be made during the same visit. 

The agreement will be made with Dantherm Air Handling A/S 

– and the overall respon-

sibility for the agreement belongs to Dantherm Air Handling A/S. 

 

Further infor-
mation 

For further information about a service agreement in your country or region, please con-
tact: 

Henrik Hersted 
After Sales Support Manager 

Dantherm Air Handling A/S 

Phone:  +45 9614 4767 
Mobile: +45 2399 4066 
Email:  [email protected] 

 

Summary of Contents for HEX 70



























Reviews: