3
General information
Introduction
This section provides general information about the unit and this Service Manual.
Target group
The target group for this Service Manual is the technicians who install, maintain and
repair the unit.
Warning
It is the responsibility of the operator to read and understand this service manual
and other information provided and to use the correct operating procedures.
The product should only be operated by qualified (trained) personnel. Failure to
do so can result in personal injury or equipment damage.
Read the entire manual before the initial start-up of the product. It is important to know
the correct operating procedures for the product and all safety precautions to prevent
the possibility of property damage and/or personal injury.
Products
The Service Manual cover the following products:
Name
Type No.
DFC 350
299763
DFC 450
299745
Copyright
Copying of this service manual, or part of it, is not allowed without written permission
from Dantherm Air Handling A/S.
Reservations
The service manual is subject to changes without notice.
CE-Declaration of
Conformity
Dantherm Air Handling A/S, Marienlystvej 65, DK7800 Skive hereby declare that the
DFC unit is in conformity with the following directives:
2006/42/EC Directory on the safety of machines
2014/35/EU Low voltage directive
2014/30/EU EMC directive
The product is manufactured with components which follow the application standards
for Low Voltage Directive and in case of norms for EMC in EU countries.
Recycling
The DFC unit is designed to last for many years. When the time comes for the unit to
be recycled, the unit should be recycled according to national rules and procedures to
protect the environment.
Summary of Contents for DFC-350-230V-C3-W-FG
Page 1: ...DFC 350 and 450 Service manual No 095821 rev 1 5 19 12 2019 EN...
Page 19: ...19 Wiring diagram CC3000...
Page 30: ...30...
Page 31: ...31...
