Dantherm DFC-350-230V-C3-W-FG, Service Manual

Page: 10 / 32

10
Starting up
Installing newest
firmware
Insert SD card into CC 3000 controller, switch power on and the firmware update will
start automatically. Wait while the firmware is installed.
(See, where to insert SD card and find more details about this process in the separate
CC 3000 manual)
Choose config file
When the installation process is finished, the CC 3000 display will automatically open
the product configuration menu.
Different config-files will show up depending on the variant of your product. Choose the
variant specific configuration that fits best to your cooling needs (see control strategy
on page 25) , if different options are available.
Variant Config File Using Control strategy…
DFC-350-230V-C3-W-FG DFC350AC Standard configuration for
DFC 350-450 AC/DC
•
Standard control strategy
DFC-450-230V-C3-W-FG DFC450AC
DFC-350-48V-C3-W-FG
DFC350DC
DFC-450-48V-C3-W-FG DFC450DC
DFC-350-230V-C3-W-
FG_X10
DFCNOMIN WITHOUT minimum speed
• normal control strategy. Fan stops
at low temperature.
•
FR + NL language incl. on SD card
DFCMINSP WITH minimum speed
•
fan continues running even at low
temperatures
•
FR + NL language incl. on SD card