P
AGE
6
46517-92-1098 <90-00085>
GETTING STARTED
T
he T/Shell software program with the 46517 NEC-to-GPP
Editor lets you configure 46062 General Purpose Processor
(GPP) databases.
To start the T/Shell program:
1.
Make sure that you are in the TSHELL directory.
2.
Type TSHELL.
3.
Press Enter. The Dantel logo appears, followed a few moments
later by the Master Menu. Here is an example of the Master Menu:
WARNING:
Always exit the program cleanly. This means that you must
select the Quit option from the Master Menu whenever you
want to leave the T/Shell program. NEVER turn off the
computer without properly exiting the program. Doing so could
corrupt the data files.
4.
If you wish to change the system parameters, highlight System
Parameters and press Enter.
The System Parameters window appears. It lets you configure the
system for LCD or color mode, menu verification, and pulse or tone
dialing. Refer to the System Parameters section of this chapter.
When you are finished, the Master Menu appears.
5.
At the Master Menu, highlight the NEC GPP Editor option.
6.
Press Enter. The NEC Edit Module menu appears:
CONTINUED
. . .
