P
AGE
34
46517-92-1098 <90-00085>
DCPF Mode - Specifies the type of communications protocol for
uploading and downloading files. Acceptable values are Y (to use
DCPF protocol) and N (to use DCP protocol). This field defaults
to Y.
The NEC responder port does not have to be configured for DCP
or DCPF protocol. This is done automatically by the NEC and
the T/Shell software.
Rpt Path - Specifies the drive and directory that the computer
is to use to store any reports that are sent to a file. For more
information, see the Reports section of the NEC GPP System
Definition chapter. This field defaults to the current directory.
NEC PARAMETERS
TERMINAL EMULATOR
T
he Terminal option of the TL1 GPP Module menu activates
the terminal emulator that imitates a dumb terminal’s
monitor. The purpose of this mode is to allow direct communica-
tions with another device.
The terminal emulator screen is blank except for the bottom
line, which displays the available command keys. Here is the
screen:
