46517-92-1098 <90-00085>
P
AGE
31
When initiating this command, a warning message appears at
the bottom left corner of the screen. An example of the warning
message is shown below.
Delete the System “DANTEL” (Y/N)?
Type Y (Yes) to delete the configuration. Type N (No) if you do
not want to delete the configuration.
WARNING:
Do not use this command unless you are positive that you will
never need the configuration again. This command erases all
references to the configuration.
NEC GPP SYSTEM DEFINITION
NEC DATA PATH
T
he NEC Data Path option of the NEC Edit Module menu lets
you specify the drive and directory path where the T/Shell
database configuration files will be stored. This is particularly
useful for running the program on a dual diskette system. Such
a setup might use Drive A for the program disk and Drive B for
the disk that holds the configuration files. This type of setup
allows you to access different configurations easily by simply
swapping disks.
Here is the NEC Edit screen with the Edit NEC Data Path
windows:
