46517-92-1098 <90-00085>
P
AGE
3
The following T/Shell programs, and all earlier versions of these
programs, are copy-protected. Current versions are not copy-
protected. Do not copy any T/Shell program with a version later
than those listed here, into a directory that has T/Shell pro-
grams with these versions or lower.
Status Monitor GPP Editor
A22-46502-XX, Version 2.0
TL1 GPP Editor
B22-46504-XX, Version 2.2
40 MAP Editor
A22-46508-XX, Version 1.3
41 MAP Editor
A22-46512-XX, Version 1.1
X.25 Sync Editor
A22-46513-XX, Version 2.1
X.25 Cascade Editor
A22-46516-XX, Version 1.0
TL1/NMA Converter Editor
A22-46521-XX, Version 1.0
X.25 Cascade Editor
A22-46522-XX, Version 1.0
Status Monitor GPP Loader
A22-46703-XX, Version 1.0
If you do not know the version number of a T/Shell program
that is already installed on your computer, go to the first
screen of the program. Press the F1 (Info) key to display the
version number.
5.
Type COPY A:*.* This assumes that the disk is in drive A. If it is
in a different drive, type the letter of that drive.
6.
Press Enter to copy all the files into your TSHELL directory from
the disk in your diskette drive.
7.
After the software has been copied into the TSHELL directory,
store the disk in a safe place.
STANDARDS
T
his section describes those commands, key, and standards
common to all Dantel software packages.
S
OFTWARE
S
TANDARDS
H
IGHLIGHT
A highlighted option in a menu is the currently selected option.
To activate an option, do either of the following:
1.
Press Enter if the option is highlighted.
2.
Type the letter of the hot key. A hot key is a specific key that can
open an option. With a color monitor, a hot key is indicated by a
yellow letter. With a monochrome monitor, a hot key is indicated by
a capital letter. In the Master Menu, the hot keys are the option
numbers. When you use the hot key method, the option does not
have to be highlighted.
INSTALLATION
