P
AGE
2
46517-92-1098 <90-00085>
ORDERING INFORMATION
NOTE: This section lists the different options available for this product. To order any of the avail-
able options, contact Dantel Inside Sales through our toll-free number, 1-800-432-6835.
OPTION NUMBER
FEATURES
A22-46517-92
NEC GPP Editor (GTE)
INSTALLATION
T
he T/Shell program can be installed on an IBM
TM
-compatible
computer equipped with the following:
♦
640K of memory
♦
CGA/EGA/VGA color (recommended), monochrome, or LCD
monitor
♦
One serial port
♦
One 3.5" diskette drive
♦
One hard disk drive
♦
DOS version 3.0 or later
This chapter explains how.
To install the software program on your computer:
1.
Turn on the power to the computer and monitor. Wait for the DOS
(Disk Operating System) prompt to appear.
2.
Insert the 46517 software disk from Dantel into the diskette drive.
3.
Select the hard disk drive (normally C) where the program is to be
installed. At the prompt type MD TSHELL to make a directory
called TSHELL. Press Enter.
4.
At the prompt type CD TSHELL. Press Enter.
NOTE:
If a TSHELL directory already exists, you may not be able to
copy the new T/Shell program into the same directory. Dantel
no longer provides copy protection with its software. T/Shell
programs that are not copy-protected must not be placed in the
same directory with T/Shell programs that are copy-protected.
