CAUTION
Install or remove modules from the shelf only when the power is off.
If you install a module in the shelf with the power on, the internal
circuitry may suffer damage and the product warranty will be void.
Remove and install circuit boards only in a static-safe environment
(use antistatic wrist straps, smocks, footwear, etc.).
Keep circuit boards in their antistatic bags when they are not in use.
Do not ship or store circuit boards near strong electrostatic, electromag-
netic, magnetic, or radioactive fields.
For more complete information on electrostatic discharge safety
precautions, refer to Bellcore
TM
Technical Reference # TR-NWT-000870.
Copyright 1997 by Dantel, Inc. • Dantel is a registered trademark of Dantel, Inc. • ISO 9001 Registered
Printed in the U.S.A.
I
NSTALLATION
& O
PERATION
M
ANUAL
46020-1297 <90-00038>
46020
M
ULTIPLE
A
LARM
P
ROCESSOR
About this Practice:
• This practice has been reissued to
meet ISO 9001 requirements.
Issue date: July 1997
Reissued Practices: Updated and
new content can be identified by a
banner in the right margin.
UPDATED
Table of Contents
Ordering Information ........................................................................... 2
General Description.............................................................................. 2
Circuit Description ............................................................................... 2
Installation............................................................................................ 4
Operation .............................................................................................. 7
Technical Specification ......................................................................... 7
Warranty ............................................................................................... 8
46020-00
MULTI-ALARM
PROCESSOR
A1146020-00 REV__
XMT DATA
RESET
