P
AGE
2
41075/77-0798 <90-00041>
NOTE:
This section lists the different options available for this product. To order any of the available
options, contact Dantel Inside Sales through our toll-free number,
1-800-432-6835.
OPTION NUMBER
FEATURES
D13-41075-00
19" Shelf; 12-Position; 400-Type
C13-41075-23
23" Shelf; 14-Position; 400-Type
A13-41077-00
19" Shelf; 12-Position; 400-Type
GENERAL DESCRIPTION
T
he 41075 is a mounting formed of aluminum alloy sheet
metal containing one 56-pin dual-readout card edge connec-
tor for each of the 12 or 14 module mounting slots.
ESD jacks are provided to make the shelf safe for electronic
components that are sensitive to static electricity. For ESD
safety, personnel working with equipment in the shelf should
ground themselves to an ESD jack. The jacks are connected
through a shelf mounting bracket to the equipment rack frame
rail.
Two optional rack mounting brackets and hardware are included
for adapting a 19-inch equipment to a 23-inch equipment shelf.
The 41075 module slots normally are pre-wired for a specific
application. If the shelf is pre-wired, a Block Diagram comes
with the shelf that shows how it is wired.
There are two identical Equipment Type labels which describe
the equipment assembly, its part number, revisions, and the job
number. They are located in the outside of the left panel of the
shelf. One label is placed in front of the mounting ear and the
other label is placed in back of the mounting ear. A serial num-
ber currently is not assigned to a shelf.
INSTALLATION
T
he 41075 mounting is shown mechanically in Fig. 1. Tools
required for installation include a Phillips screwdriver and a
3/8 hex nut driver.
ORDERING INFORMATION
UPDATED
NEW NOTE
N
OTE
:
This practice now documents the
41077 as well as the 41075. The
only differences are that:
The 41077 is only available in
19-inch, 12-position configuration.
The mounting ears on the 41077
are even with the front of the shelf
rather than halfway back.
