05615-0198 <90-00048>
P
AGE
13
OPERATION
A
fter you configure the test set it begins operation when you
plug the test set in and flip the rear panel power switch up.
The test set automatically interrogates equipment for alarms
based on the configuration in the MAP’s memory. The processed
alarms can be sent to the alarm center when requested or
monitored locally if a terminal or printer is connected to the
MAP’s printer port.
The MAP has a battery to retain the configuration when the test
set is unplugged or if power goes out. When power is restored,
the MAP resumes operation.
NOTE:
You must configure the MAP with Dantel’s 40 MAP Editor
software (46508) to collect and process alarms correctly.
LEDs on the front panels of the modules and subassemblies
show the activity on the transmit and receive paths and the
handshaking lines.
There is a reset button on the front panel of the 44210 460
Modem module that you can push if you need to reinitialize the
modem.
