27
Function Module Interface
w w w . t e c n a r e . c o m
DAV-4x500 Amplifier | rev.:1.1
DAV-4x500
5.4. Input EQ
Double-click on the module button,
the following figure 38, input equalizer setting module, will
appear. The button in the upper right corner of the module can enlarge this module, and the interface display will be
clearer after being enlarged.
Fig 38. Input equalizer setting module
The thirty-one equalisation filters may each be used to emphasise (by applying a positive Gain pa
-
rameter setting) or de-emphasising (by applying a negative Gain parameter setting) a range of frequencies centred
on the setting of the Frequency parameter, and encompassing a frequency range determined by the Bandwidth pa-
rameter setting.
PEQ, LF & HF shelving and two All-pass allows filters are available for one each frequency.
The thirty-one filters are used in combination to achieve the desired response across all frequencies.
5.4.1.
Function button
As shown in Figure 38, the functions of the top buttons are:
1. Phase:
Displays the phase curve of the current channel.
2.
View:
Show or hide all equalization control points.
3. Bypass:
Turn on or off all equalizer EQs of the current channel at the same time
4. Preset:
Save the current equalizer setting parameters to the computer, and recall to overwrite the
existing equalizer parameters.
5. Copy:
Copy the current equalizer parameter value and paste it into other input channels.
6.
Paste:
Used in combination with the Copy button to paste the copied equalizer parameter values into
the current channel.
7.
Reset:
Reset the equalizer parameters to the default parameter values.
5.4.2.
EQ Preset
As shown in Figure 39, the EQ Preset window will appear when you click the EQ Preset button.
Summary of Contents for tecnare DAV-4x500
Page 2: ......
