Page
22
of
39
Connecting The GTM To A Dante Network
The GTM is a network audio device utilizing the reliable and versatile Dante audio over
IP protocol. Dante is a proprietary system (although very widely used) the originators of
which are Audinate.
The information below is only meant as a very basic guide. Full details of the power of
Dante network audio and instructions for using it can be found at
Getting Dante Controller
If you are connecting the GTM to a new Dante network the first thing you will need to
do is to get the free Dante controller software from Audinate.
This can be downloaded by visiting Audinate’s web site at
Connecting GTM device to the network
The GTM can be connected to the network that you are going to use for your audio
distribution simply by plugging in to the RJ45 network connections on the rear. Once
connected to the network it will be possible to see the GTM from within the Dante
controller and route its’ audio circuits.
Audio Over IP Network
We strongly recommend that you consider your network topology carefully and would
not recommend sharing broadcast audio and general data on the same network.
For more details of audio over IP network structure please visit