manualshive.com logo in svg

DANPHONE Futronic MKII, User Manual

Share
Download
DANPHONE Futronic MKII User Manual Download Page 45

 

Page 45 of 65 

 

 

Use 

setup 3, 4 or 5 from “Setup for AIS tests” to request the UTC time. Select 

“Request AIS 

Message 11

”

 and press 

“OK”

. Then, select AIS frequency and press 

“OK”

 again.  

 
The test box will automatically synchronize with the AIS transponder; transmit the request and 
then switch to receiving mode. Wait for the transponder to respond and check the MSG 11 
information appearing on the test box display. 
 
The received MSG 11 information will also be stored in the test box memory. 

 

 
   

Example of Printout from the Memory

: 

 
   AIS # 1   Time/date: 13:06:06 / 22-01-2018 
   Message ID: 11  MMSI:  111661003 
   Position:  57d12.3745 N    9d41.0067 E  Electronic position fixing device: 1 
   Date: 22-01-2018 Time: 12:05:58 
   AIS1 RF: 161,974.7 kHz Fwd.: 11.6 Watt Rev.: 0.6 Watt  VSWR: 1.59 

 

 
 

Request Message 24 (Class B) 

 
Use 

setup 3, 4 or 5 from “Setup for AIS tests” to request a Message 24 from Class B 

transponders. MSG 24 is divided in two: MSG 24A presenting the ship’s MMSI and name - and 
MSG 24B providing information of the ship’s MMSI, type of ship, call sign and dimensions. 
 
It is a requirement that the MMSI number registered in the test box is identical with the MMSI of 
the AIS transponder to be tested. Please check and change number, if required, using the Edit 
ship’s MMSI menu on page 12. 
Select 

“Request MSG 24”

 and press 

“OK”

. Then, select AIS frequency and press 

“OK”

 again.  

 
The test box will automatically synchronize with the AIS transponder; transmit the request and 
then switch to receiving mode. Wait for the transponder to respond and check the MSG 24 
information appearing on the test box display. 
 
The received MSG 24 information will also be stored in the test box memory. 
 
 
    

Example of Printout from the Memory

: 

 
    AIS # 1   Time/date: 14:41:30 / 19-04-2017  
    Message ID: 24 MMSI:  219015583  
    Name: LIMFJORD PILOT 1@@@@  
    AIS1 RF: 161,975.1 kHz  Fwd.: 1.9 Watt  Rev.: 0.0 Watt  VSWR: 1.00 
  
    AIS # 1   Time/date: 14:41:31 / 19-04-2017  
    Message ID: 24 MMSI:  219015583  
    Type of ship: 50 C.SIGN: OX2520@  
    Dimension of ship: A: 7 m  B: 5 m  C: 1 m  D: 3 m  
    AIS1 RF: 161,975.1 kHz  Fwd.: 1.9 Watt  Rev.: 0.0 Watt  VSWR: 1.00 

 
 
 

 

 

Summary of Contents for Futronic MKII


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands