DMR-6 Mid-Rise Scissor Lift
6
P/N 5900253 — Rev. A — August 2020
Components
DMR-6 components include:
•
Scissor Structure
. Holds the Lift together. Pivots in the middle. The two scissor pieces move
together to raise the Lift, move apart to lower it.
•
Power Unit
. Provides Hydraulic Fluid to the Hydraulic Cylinders, which they use to raise the
Scissor Structure. Connects to an external power source.
•
Platform
. Located on the top of the Scissor Structure. Holds the Arms and the Lift Pads.
•
Hydraulic Cylinders
. Move the Scissor Structure and Platform up to raise a Vehicle, move them
down to lower a Vehicle.
•
Long Hydraulic Hose
. Connects to the Hydraulic Cylinder on the Lift closest to the Power Unit.
•
Short Hydraulic Hose
. Connects the two Hydraulic Cylinders on the Lift.
•
Safety Locks
. Hold the Platform in place, once they are engaged. The DMR-6 has three Safety
Lock positions, which lets you select the right Vehicle height for your needs.
•
Lift Arm
. Attaches to the inside channels of the Platform, used for holding the Lift Pads.
•
Lift Pads
.
Not shown
. Black, rubber Pads that make contact with the Lifting Points on the
underside of the Vehicle being raised; do
not
raise a Vehicle on the Platform. Using the Lift Pads is
required
.
•
Portable Stand
. Holds the Power Unit, has two mounting holes to attach the Power Unit.
•
Tow Cart
. Used for moving the Lift around your work space.
•
Tow Pin
. Attached to the Tow Cart, hooks to the Lift so you can move it.
Summary of Contents for DMR-6
