7
02 9604 1226 | [email protected] | daniela.au
BEFORE THE FIRST USE
When using the appliance for the first time. Clean it as follows:
Clean the surface with a soft cloth and then dry it.
Pre-heat the empty drawer for at least two hours. Tum the temperature knob to the maximum setting,
in order to eliminate any residual grease, oil, or manufacturing resins which may cause unpleasant
odours during heating.
Air out the room.
APPLIANCE CONTROLS
The control elements are the temperature knob and the luminous ON-OFF switch.
With the switch pressed (position 1) the drawer is on, whereas when the switch is released (position 0)
the drawer is off. These parts can be seen only when the drawer is open.
When the drawer is closed, a control light located on the front of the appliance lets you see whether
the drawer is on.
OPERATION
• Place the dishes in the drawer
• Select a temperature
• Turn on the appliance; the switch will light up
• Close the drawer gently
• Turn off the appliance before removing the heated dishes.
TEMPERATURE SELECTION
The temperature knob lets you select a temperature between approximately 30℃and 75℃.
Turn the temperature knob clockwise only. Until the stop that indicates the maximum setting, and then
counter-clockwise.
Do not force it beyond the stop, otherwise the thermostat will be damaged.
The temperature scale does not show absolute temperatures in ℃,but rather symbols that represent
the best temperature for respective groups of dishes:
IMPORTANT SAFETY & CARE INSTRUCTIONS