D A N I E L A
A P P L I A N C E S
10
For the following problems contact a qualified technician or technical service:
If the dishes do not get warm, check whether:
• there is fan noise: the fan is working, but the heating element might be defective
• if the fan is not working, it may be defective
• the main switch of the electrical system is off.
• the electrical power cord is unplugged or damaged
If the dishes overheat:
• the temperature setting device may be defective
The on/off switch does not light up when the appliance is switched on:
• the control light of the switch is defective.
INSTALLATION
Safety instructions for installation
Before connecting the appliance to the electrical mains, compare the connection data (voltage and
frequency) indicated on the data plate with the data of the electrical mains.
The data must match, otherwise the appliance may be damaged.
If in doubt, contact a qualified technician.
Make sure that the electrical outlet is easily accessible even after the appliance has been inserted.
The dish warmer can only be inserted with other appliances with a maximum weight of 40 kg that are
provided with adequate cooling ventilation.
If the warmer drawer is combined with other appliances, this voids the guarantee, since proper use is
not ensured.
For installation of the combination appliance, follow the instruction in the relative us and installation
book.
Insertion and installation of this appliance may be performed by qualified personnel who ensure safe
operating condition.
Insertion space measurements
The dimensions of the housing are obtained from the size of the warmer drawer plus measurements
of the appliance combined with it.
All measurements are indicated in millimeters.
TECHINCAL DATA
Total power:
380-460W
Connection and protection:
AC 220-240V/50 Hz
IMPORTANT SAFETY & CARE INSTRUCTIONS