Assemble valve parts, O-rings, distributor plate, cardan shaft, gear set, and end cover to gear set end of housing
To assemble below parts to gear set end of housing, follow these steps.
Ensure that the VSPP unit is placed in the holding tool, with the column surface on the fixture.
VSPP correctly placed in holding tool for assembly
VSPP exploded view drawing - gear set end
Item
Description
Wrench size
Torque
4
Threaded bushing
12 mm screw driver
Screw below surface of housing
172
Pin bolt screw for LS check
2 mm Hex key
1 ± 0.1 N•m [8.9 ± 0.9 lbf•in]
31
Screw
13 mm socket spanner
30 ± 6 N•m [265 ± 52 lbf•in]
32
Pin bolt screw
13 mm socket spanner
30 ± 6 N•m [265 ± 52 lbf•in]
1. Place balls as illustrated in the drawing:
a) Place ball (1x 5) Ø6mm for emergency steering.
b) Place ball (2x 81) Ø5/16” /Ø4,8 mm for suction valves.
c) Place ball (1x 173) Ø3,5 mm for LS-check function.
Service Manual
VSPP Steering unit
VSPP assembly
26 |
©
Danfoss | November 2019
AX319758618681en-000101
