NOTICE
-
The signals on this connector are referred to GND and must therefore be reinforced insulated against the motor phases. The
internal insulation must withstand 4240 V DC and an 8000 V
peak
impulse.
NOTICE
-
Only PELV potential can be connected to the temperature sensor input.
NOTICE
-
The maximum length of the brake cable is 80 m (shielded).
11.7.3 Ethernet Connectors
Ethernet connectors are located on all the system modules.
e
3
0
b
e
3
9
5
.1
0
8
1
Illustration 134: Ethernet Connector
NOTICE
-
Only PELV potential can be connected to the digital inputs and outputs.
Specifications
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170| 217
Danfoss A/S © 2019.10
Summary of Contents for VLT MSD 510
Page 1: ...Operating Guide VLT Multiaxis Servo Drive MSD 510 System...
Page 2: ......