Danfoss VLT MCD 600, Operating Manual, Page: 115 / 140

Table 180: 11-7 - Pump Clean Cycles
Range Function
* 1 1–5 Sets how many times the soft starter repeats the pump clean cycle.
10.16 Parameter Group 12-** Communication Card
Table 181: 12-1 - Modbus Address
Range Function
* 1 1–254 Sets the Modbus RTU network address for the soft starter.
Table 182: 12-2 - Modbus Baud Rate
Option Function
Selects the baud rate for Modbus RTU communications.
4800
* 9600
19200
38400
Table 183: 12-3 - Modbus Parity
Option Function
Selects the parity for Modbus RTU communications.
* None
Odd
Even
10-bit
Table 184: 12-4 - Modbus Timeout
Option Function
Selects the timeout for Modbus RTU communications.
* Off
10 seconds
60 seconds
100 seconds
Table 185: 12-5 - Devicenet Address
Range Function
*0 0–63 Sets the DeviceNet network address for the soft starter.
AQ262141844215en-000401 / 175R1174 | 111 Danfoss A/S © 2020.12
Programmable Parameters
VLT® Soft Starter MCD 600
Operating Guide