Items Supplied
•
Male LCP 21-RJ45 converter plug (1).
•
Female LCP 21-RJ45 converter plug (1).
•
Thread cutting screws (4).
More Items Required
•
Local control panel (LCP 21), ordering number
132B0254.
Installation
1.
Mount the male LCP 21-RJ45 converter plug on the
frequency converter and fasten with 2 thread cutting
screws, see
Illustration 1.1
.
2.
Tighten the screws to 1.3 Nm (11.5 in-lb).
Illustration 1.1 Mounting the Male LCP 21-RJ45 Converter Plug
3.
Mount the female LCP 21-RJ45 converter plug on the
LCP 21 (local control panel), and fasten with 2 thread
cutting screws, see
Illustration 1.2
.
4.
Tighten the screws to 1.3 Nm (11.5 in-lb).
Illustration 1.2 Mounting the Female LCP 21-RJ45 Converter Plug
5.
Connect the 2 LCP 21-RJ45 converter plugs with a
shielded Ethernet cable, maximum 15 m (49.2 ft)
long.
Installation Instructions
VLT
®
Control Panel LCP 21 - RJ45 Converter Kit
Danfoss A/S © 08/2017 All rights reserved.
MI07M102
