[27]
Logic rule 1
Use the result of logic rule 1 in the logic rule.
[28]
Logic rule 2
Use the result of logic rule 2 in the logic rule.
[29]
Logic rule 3
Use the result of logic rule 3 in the logic rule.
[33]
Digital input DI18
Use the value of DI18 in the logic rule (High = TRUE).
[34]
Digital input DI19
Use the value of DI19 in the logic rule (High = TRUE).
[35]
Digital input DI27
Use the value of DI27 in the logic rule (High = TRUE).
[36]
Digital input DI29
Use the value of DI29 in the logic rule (High = TRUE).
[37]
Digital input DI32
Use the value of DI32 in the logic rule (High = TRUE).
[38]
Digital input DI33
Use the value of DI33 in the logic rule (High = TRUE).
[39]
Start command
This event is TRUE if the adjustable frequency drive is started by any means (either via digital input,
serial communication bus or other).
[40]
Drive stopped
This event is TRUE if the adjustable frequency drive is stopped or coasted by any means (either via
digital input, serial communication bus or other).
[41]
Reset Trip
This event is TRUE if the adjustable frequency drive is tripped (but not trip-locked) and the reset
button is pressed.
[42]
Auto Reset Trip
This event is TRUE if the adjustable frequency drive is tripped (but not trip-locked) and an automatic
reset is issued.
[43]
OK Key
This event is TRUE if the OK key on the LCP is pressed.
[44]
Reset Key
This event is TRUE if the Reset key on the LCP is pressed.
[45]
Left Key
This event is TRUE if the Left key on the LCP is pressed.
[46]
Right Key
This event is TRUE if the Right key on the LCP is pressed.
[47]
Up Key
This event is TRUE if the Up key on the LCP is pressed.
[48]
Down Key
This event is TRUE if the Down key on the LCP is pressed.
[50]
Comparator 4
Use the result of comparator 4 in the logic rule.
[51]
Comparator 5
Use the result of comparator 5 in the logic rule.
[60]
Logic rule 4
Use the result of logic rule 4 in the logic rule.
[61]
Logic rule 5
Use the result of logic rule 5 in the logic rule.
13-02 Stop Event
Option:
Function:
Select the Boolean (TRUE or FALSE) input to deactivate Smart Logic Control.
[0] *
FALSE
Enters the fixed value of FALSE in the logic rule.
[1]
TRUE
Enters the fixed value TRUE in the logic rule.
[2]
Running
See parameter group 5-3* for further description.
[3]
In range
See parameter group 5-3* for further description.
[4]
On reference
See parameter group 5-3* for further description.
[5]
Torque limit
See parameter group 5-3* for further description.
[6]
Current limit
See parameter group 5-3* for further description.
3 Parameter Description
VLT
®
HVAC Drive Programming Guide
3-120
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
3