Setting in
parameter group
5-3* Digital Outputs
Setting in
[0] No
[1] Yes
[200] Pump 1
Running
Controlled by
RELAY1
Frequency converter
controlled
[201] Pump 2
Running
Controlled by
RELAY2
Controlled by
RELAY1
[203] Pump 3
Running
Controlled by
RELAY3
Controlled by
RELAY2
Table 3.12 Settings
5-30 Terminal 27 Digital Output
This parameter has the options described in
Digital Outputschapter 3.7.4 5-3* Digital Outputs
Option:
Function:
[0]
*
No operation
5-31 Terminal 29 Digital Output
This parameter has the options described in
Digital Outputschapter 3.7.4 5-3* Digital Outputs
Option:
Function:
[0]
*
No operation
This parameter has the options described in
chapter 3.7.3 5-3* Digital Outputschapter 3.7.4 5-3* Digital
Outputs
5-32 Term X30/6 Digi Out (MCB 101)
Option:
Function:
[0]
*
No operation This parameter is active when option module
MCB 101 is mounted in the frequency
converter.
5-33 Term X30/7 Digi Out (MCB 101)
Option:
Function:
[0]
*
No operation This parameter is active when option module
MCB 101 is mounted in the frequency
converter. Same options and functions as
parameter group
5-3* Digital Outputs
.
3.7.4 5-4* Relays
Parameters for configuring the timing and the output
functions for the relays.
5-40 Function Relay
Array [8]
(Relay 1 [0], Relay 2 [1]
Option MCB 105: Relay 7 [6], Relay 8 [7] and Relay 9 [8]).
Select options to define the function of the relays.
The selection of each mechanical relay is realised in an array
parameter.
Option:
Function:
[0]
No operation
5-40 Function Relay
Array [8]
(Relay 1 [0], Relay 2 [1]
Option MCB 105: Relay 7 [6], Relay 8 [7] and Relay 9 [8]).
Select options to define the function of the relays.
The selection of each mechanical relay is realised in an array
parameter.
Option:
Function:
[1]
Control Ready
[2]
Drive ready
[3]
Drive rdy/rem ctrl
[4]
Standby / no warning
[5]
Running
Default setting for relay
2.
[6]
Running / no warning
[8]
Run on ref/no warn
[9]
Alarm
Default setting for relay
1.
[10]
Alarm or warning
[11]
At torque limit
[12]
Out of current range
[13]
Below current, low
[14]
Above current, high
[15]
Out of speed range
[16]
Below speed, low
[17]
Above speed, high
[18]
Out of feedb. range
[19]
Below feedback, low
[20]
Above feedback, high
[21]
Thermal warning
[25]
Reverse
[26]
Bus OK
[27]
Torque limit & stop
[28]
Brake, no brake war
[29]
Brake ready, no fault
[30]
Brake fault (IGBT)
[31]
Relay 123
[33]
Safe stop active
[35]
External Interlock
[36]
Control word bit 11
[37]
Control word bit 12
[40]
Out of ref range
[41]
Below reference, low
[42]
Above ref, high
[45]
Bus ctrl.
[46]
Bus ctrl, 1 if timeout
[47]
Bus ctrl, 0 if timeout
[60]
Comparator 0
[61]
Comparator 1
[62]
Comparator 2
[63]
Comparator 3
[64]
Comparator 4
[65]
Comparator 5
[70]
Logic rule 0
Parameter Descriptions
VLT
®
HVAC Drive FC 102
76
Danfoss A/S © 03/2015 All rights reserved.
MG11CE02
3
3