4.2.5 Changes Made Function
The changes made function lists all parameters changed from default settings.
•
The list shows only parameters that have been changed in the current edit setup.
•
Parameters that have been reset to default values are not listed.
•
The message
Empty
indicates that no parameters have been changed.
4.2.6 Changing Parameter Settings
Procedure
1. To enter the Quick Menu, press the [Menu] key until the indicator in the display is placed above Quick Menu.
2. Press [
▵
] [
▿
] to select the wizard, closed-loop setup, motor setup, or changes made.
3. Press [OK].
4. Press [
▵
] [
▿
] to browse through the parameters in the Quick Menu.
5. Press [OK] to select a parameter.
6. Press [
▵
] [
▿
] to change the value of a parameter setting.
7. Press [OK] to accept the change.
8. Press either [Back] twice to enter Status, or press [Menu] once to enter the Main Menu.
4.2.7 Accessing All Parameters via the Main Menu
Procedure
1. Press the [Menu] key until the indicator in the display is placed above Main Menu.
2. Press [
▵
] [
▿
] to browse through the parameter groups.
3. Press [OK] to select a parameter group.
4. Press [
▵
] [
▿
] to browse through the parameters in the specific group.
5. Press [OK] to select the parameter.
6. Press [
▵
] [
▿
] to set/change the parameter value.
7. Press [OK] to accept the change.
Programming
Operating Guide | VLT® HVAC Basic Drive FC 101
AQ275641848264en-000101 / 132R0078
60 | Danfoss A/S © 2019.11
Summary of Contents for VLT HVAC Basic Drive FC 101
Page 1: ...Operating Guide VLT HVAC Basic Drive FC 101...
Page 2: ......